Prowinch PWLD Serie Manual Del Usuario página 27

Step 5: Couple the hook to the anchor point
If you can't find a suitable anchor point you can make one using accessories
Step 6: Move the lever to the "Engage Position". Now the Winch is ready to pull.
Step 7: Check all the anchor points before continuing.
Step 8: Plug in the Winch control. It's recommended to proceed with the operation from the driver seat at this point.
Step 9: To begin operation, run the engine, put it in neutral and hold the engine speed at idle.
Step 10: Press the "IN"button on the remote. Start pulling with the winch until the wire rope it's tensioned.
Step 11: Put something over the wire rope.
27