Measurements And Calculations (Sonosite Sii); General Calculations; Volume Calculation; Measurement References (Sonosite Sii) - FujiFilm SonoSite Edge II Manual De Instrucciones

Measurements and Calculations (SonoSite SII)

General calculations

Volume calculation

WARNING To avoid incorrect calculations, verify that the patient information, date, and time
To avoid misdiagnosis or harming the patient outcome, start a new patient form
The volume calculation involves three 2D distance measurements: D1, D2, and D3. After all measurements
are saved, the result appears on-screen and in the patient report.
The volume calculation is available in the following exam types: Abdomen, Arterial, Breast, Gynecological,
Musculoskeletal, Nerve, Small Parts, Venous, and Superficial.
To calculate volume
Do the following for each image you need to measure:
1 On a frozen 2D image, tap Calcs.
2 Do the following for each measurement you need to take:
a From the calculations menu, under Volume, select the measurement name.
If Volume is not available in a Gyn exam, select Gyn and then select Volume.
b Using the touchpad or the touchscreen, position the calipers
c Tap Save Calc to save the calculation.
A check mark appears next to the saved measurement.
3 To save a picture of the finished calculation, tap
4 Tap Back to exit the calculation.

Measurement References (SonoSite SII)

The following information was not included in the SonoSite SII system user guide; the revision will be made
in the next update.
General calculations
settings are accurate.
before starting a new patient exam and performing calculations. Starting a new
patient form clears the previous patient's data. The previous patient's data will be
combined with the current patient if the form is not first cleared.
.
7