Manufacturer's Declaration - FujiFilm SonoSite Edge II Manual De Instrucciones

Table 1-2: Accessories and peripherals compatible with SonoSite SII ultrasound system
Description
Power supply AC cable
PowerPark
USB wireless adapter
USB memory drive
For transducers, the maximum cable length is measured between the strain reliefs. The stated length do not include
the lengths of cable in the following locations: underneath the strain reliefs, inside the transducer enclosure, and
inside the transducer connector.

Manufacturer's declaration

The tables in this section document the intended use environment and EMC compliance levels of the system.
For maximum performance, ensure that the system is used in the environments described in this table.
The system is intended for use in the electromagnetic environment specified below.
Table 1-3: Manufacturer's Declaration - Electromagnetic Emissions per IEC 60601-1-2:2007
and IEC 60601-1-2:2014
Emissions Test
RF emissions
ClSPR 11
RF emissions
ClSPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/flicker
emissions
IEC 61000-3-3
16
Maximum Cable Length
39 in/1 m
—
—
—
Compliance
Group 1
Class A
Class A
Complies
Electromagnetic Environment
The Edge II and SII ultrasound
systems use RF energy only for
their internal functions. Therefore,
their RF emissions are very low and
are not likely to cause any
interference in nearby electronic
equipment.
The Edge II and SII ultrasound
systems are suitable for use in all
establishments other than
domestic and those directly
connected to the public low-
voltage power supply network
which supplies buildings used for
domestic purposes.
Manufacturer's declaration