Denon AVR-3802 Instrucciones De Operación página 12

l_[l]!!_Sl]
NOTES:
-- Assignment of low frequency signal range --
• The only sig_lals produced from the subwoofer channel are LFE signals (during playback of Dolby Digital or
DTS signals) and the low frequency signal range of channels set to "Small" in the setup menu The low
frequency signal range of channels set to "Large" are produced from those channels
-- Crossover Frequency --
• When r'Subwoofer" S set to "Yes" at the "Speaker Configuration Setting"r set the frequency (Hz) below
which the bass sound of the various speakers is to be output from the subwoofer (the crossover
frequency)
• For speakers set to "Smallr', sound with a frequency below the crossover frequency is cut, and the cut bass
sound is output from the subwoofer instead
NOTE: For ordinary speaker systemSr we recommend setting the crossover frequency to 80 Hz When
using small speakers, however, setting the crossovel frequency to a high frequency may improve
frequency response for frequencies near tile crossover frequency
-- Subwoofer mode --
• The subwoofer nlode setting is only valid when "Large" is set for the frollt speakers and "Y_s" is set for
the subwoofer in the "Speaker Configuration" settings (see page 10)
• When the r'LFE+MAIN" playback mode is selected, the low freque_lcy signal range of cha_lnels set to
"Large" are produced simultaneously from those cha_mels and the subwoofer channel
I_ this playback mode, the low frequency range expand more u_iformly through the room, but depend ng
on the sze and shape of the room, interfere_ce may result n a decrease of the actual volume of the low
frequency range
• Selection of the "LFE r, play mode will play the low frequency sgnal range of the cha_lnel selected with
"Large" from that channel only Therefore, the low frequency signal range that are played from the
subwoofer channel are only the low frequency signaJ range of LFE {o_ly duri_g Dolby Digital or DTS sig_al
playback) and the cha_nel specified as "SmalF' n the setup menu
• Select the play mode that provides bass reproduction with body
• When the subwoofer is set to "y_Sr'r bass sou_ld is output from the subwoofer regardless of the subwoofer
mode setti_g i_ surround modes other tha_ Dolby/DTS
Set the operation for the digtal signals when playing in the 61 SURROUND and DTS-ES surround modes
2
At the System Setup Me_u select "SB CH
Auto Flag Deterct" and press the ENTER
button
System Setup Menu
t 1
Power _'np Aeal|nment
Speaker Configuration
_SB CH Auto Flel Olteat
Oelay Time
Chlnnal Level
Oi|itml In Assilnment
Multi Vol, Level
On Screen Display
Auto Tuner Presets
Select the desired setting
We recommend settng this
to "OFF"
When set to "ON", the
operation for software for
which no identification
signals are recorded is set
_DTS-ES,/_ 1Source
Auto Flag Oeteet Mode
OTSE ='SOUr=. ] 2
Auto Flal Detect Moda
Non-Flag Source
SBch Output
_ NON- OFF
_,ffRX
Setting
"/l Auto Flag Detect Mode {AFDM)
ON: This function o_ly works for sources co_taining DTS-ES or 61-channel surround dentif cation sig_als
When this function is used, sources that have been recorded in 61-channel surround or DTS-ES are
automatically played in the 61 -channel surround mode using the surround back speaker(s) (Refer to
_2: for the method of playback of the surround back speaker n this case)
OFF: Set this mode if you wish to play normal _%channel sources or sources not containing the
identification signals described below in the 61-channel mode
,_2 NomFlag Source SBch Output
MTRX ON: Sources are played using the surrou_d back speaker(s) The surround back chan_el is played
with digital matrix processing
NON-MTRX: Sources are played using the surround back speaker(s) The same signals as those of the
surround channel are output from the surround back speaker(s)
OFF: Sources are played without using the surround back speaker(s)
Ente_ the setting
The System Setup Menu reappears
NOTES:
• The "SB CH Auto Flag Detect" setting scree_ is displayed when the surround back speaker is set to
"Large" or "Small" at "Speaker Conf guration"
=The surround back speakers can also be turned on and off using the "61/71 Surround" surround
parameten (See page 29)
• Input the distance between the listening position and the different speakers to set the delay time for the
surround mode
• The delay time can be set separately for surround speakers A and B
Preparatiorls:
Measure the distances between the listeni_g position and the speakers
(L1 to L5 on the d agram at the right)
LI : Dista_ce betwee_ center speaker and listening position
L2: Dista_ce betwee_ front speakers and listening position
L3: Dista_ce between surround speakers a_d liste_fing position
L4: Dista_ce betwee_ surround back speakers and listening positio_
LS: Dista_ce betwee_ subwoofer and listening position
3
At the System Setup Menu select "Delay T_me"
System Setup Menu t
Power Amp AasIKnmant
Speaker Configuration
SB CH Auto Flei Detect
_OQlay Timg
Channel Level
Oliltel In A_al_nment
Multi VoL Level
On Screen Display
Auto Tuner Presets
Switch to the Delay Time scree_
Oeley Time
Sit The Distance To
Each Speakers
Do You Prefer
In Meters? / In Feet?
_etera 4:_ Feet
Select the desired unit r meters or feet
Select (darken) the desired units,
r'
Meters" or "Feet"
Oeley Time
Set The Distance To
Each Speakers
Do You Prefer
In Meters? / In Feet?
_[_ _:_ Feet
Ex:,rnple When Meters _ _s se_e_d
12