Honda CB250 TWISTER Manual Del Propietário página 125

CB250 TWISTER
5. Check the spark plug gap using a wiretype feeler
gauge.
If adjustment is necessary, bend the side elec-
trode carefully.
The gap should be:
0.80 - 0.90 mm (0.031 - 0.035 in)
1. Spark plug gap
2. Side electrode
2
1
6. Make sure the plug washer is in good condition.
7. Install the spark plug. With the plug washer
attached, thread the spark plug in by hand to
prevent cross-threading.
8. Tighten the spark plug:
If the old plug is good:
1/5 turn after it seats.
If installing a new plug, tighten it twice to prevent
loosening:
a) First, tighten the plug:
1/4 turn after it seats.
b) Then loosen the plug.
c) Next, tighten the plug again:
1/5 turn after it seats.
N
OTICE
An improperly tightened spark plug can damage
the engine. If a plug is too loose, a piston may
be damaged. If a plug is too tight, the threads
may be damaged.
9. Reinstall the spark plug cap. Take care to avoid
pinching any cables or wires.
39