Setting Up Area Codes; Local Area Code; Connecting A Headset - Siemens Gigaset C590 Manual De Instrucciones

Setting up area codes

Before you can return a call from the Calls list (
area code of the area in which your phone is being used. If your phone is in a mul-
tiple area code area, you must also store the extra codes for that area.

Local Area Code

Ï
¢
v
~
§Save§
a
Extra Codes
Ï
¢
v
~
§Save§
a
Repeat the above steps until all the extra codes have been entered for your area. A
maximum of five (5) extra codes can be stored.

Connecting a headset

Warning
Do not charge the handset in charging unit or base while the headset is
connected.
¢ ¢
Telephony Local Area Code
Enter the local area code.
Press the Display key.
When the Saved message displays, press and hold to return to idle
state.
¢ ¢
Telephony Extra Codes
Enter the extra code.
Press the Display key.
When the Saved message displays, press and hold to return to idle
state.
You can connect a headset with a 2.5 mm jack connector.
See the relevant product page at www.gigaset.com for
information on recommended headsets.
The headset volume corresponds to the settings for the
handset volume (
replace the plastic cover to enable optimum sound in
speaker mode.
¢
page 33), you must store the local
¢
page 49). After using the headset,
First steps
17