Electrical Connection - Faber CYLINDRA GLOSS PLUS Manual De Instrucciones

ELECTRICAL CONNECTION

• Connect the Hood to the mains power supply, insert-
ing a two-pole cut-out switch with contact aperture of
at least 3 mm along the line.
• Ensure that the supply cable connector is properly
inserted into the Suction device socket
• Hook up the Commands connector Cmd.
• Hook up the connector H2H.
• Hook up the Spotlights connector Lux to the socket
provided behind the lighting unit cover.
• For the Recirculation Version, fit the Activated Char-
coal Odour Filter.
• Replace the filters and the lighting unit.
EN
H2H
12
1