Replacing Oven Lights; Light Bulbs; Troubleshooting - Viking Range 3 Serie Manual De Uso Y Cuidado

Replacing Oven Lights

Light Bulbs

1. To replace light bulbs, first disconnect power to the oven at the circuit
breaker panel or by unplugging.
2. To release cover, remove the screw on the light cover. (See illustration.)
3. Replace light bulbs with equivalent watt bulb available from your Viking
Range, LLC Authorized Servicer or parts distributor. Bulbs are also avail-
able at most hardware stores or lighting centers. DO NOT USE A BULB
LARGER THAN 30 WATTS.
4. Close light cover and secure with screw removed in step 2.
CAUTION
Light cover may become very hot.
Do not touch glass when light is on.

Troubleshooting

Please check the following before calling for service:
Place one cup of water in a glass measuring cup in the oven and close the door securely.
Operate the oven for one minute at HIGH 100%.
A.
Does the oven light come on?
B.
Does the cooling fan work? (Put your hand over the left side of louver.)
C. Does the turntable rotate? (It is normal for the turntable to turn in either direction.)
D. Is the water in the oven warm?
If "NO" is the answer to any of the above questions, please check electrical outlet, fuse and/or circuit breaker. If they are
functioning properly, CONTACT YOUR NEAREST VIKING RANGE, LLC AUTHORIZED SERVICER.
A Built-in Microwave Hood should never be serviced by a "do-it-yourself" repair person.
NOTE:
• If time appearing in the display is counting down very rapidly, check Demonstration Mode on page 21 and cancel.
Light cover
25
Light bulbs
Screw
YES _______ NO _______
YES _______ NO _______
YES _______ NO _______
YES _______ NO _______
E