Multiple Sequence Cooking; More Or Less Time Adjustment; Light Hi/Lo; Fan Hi/Lo - Viking Range 3 Serie Manual De Uso Y Cuidado

Control Panel and Settings

Multiple Sequence Cooking

Your Built-in Microwave Hood can be programmed for up to 4 automatic cooking sequences, switching from one power
level setting to another automatically.
Sometimes cooking directions tell you to start on one power level and then change to a different power level. Your Built-in
Microwave Hood can do this automatically.
• Roast beef - cook for 5 minutes at 100% and then continue to cook for 30 minutes at 50%.
1. First enter cooking time. Then touch Power Level pad once for 100% power.
2. Enter second cooking time. Touch Power Level pad 6 times for 50% power.
3. Touch START/Add-A-Minute pad.
NOTE:
• If Power Level pad is touched once,
• If 100% is selected as the final sequence, it is not necessary to touch the Power Level pad.
• Keep Warm Plus can be programmed even if 4 cooking sequences have been set.

More or less time adjustment

Should you discover that you like any of the Instant Sensor, Sensor Cook, Defrost, Reheat or Hot Water settings slightly
more
done, touch the Power Level pad once after touching your choice of pads or before touching START/Add-A-Minute
pad. The display will show MORE
Should you discover that you like any of the Instant Sensor, Sensor Cook, Defrost, Reheat or Hot Water settings slightly
less done, touch the Power Level pad twice after touching your choice of pads or before touching START/Add-A-Minute
pad. The display will show LESS
Add-A-Minute
Add-A-Minute allows you to cook for a minute at 100% by simply touching the a START/Add-A-Minute pad. You can
also extend cooking time in multiples of 1 minute by repeatedly touching the START/Add-A-Minute pad during manual
cooking.
• Soup (1 cup)
Touch START/Add-A-Minute pad.
NOTE:
• To use Add-A-Minute, touch pad within 3 minutes after cooking, closing the door, touching the STOP/Clear pad or
during cooking.
• Add-A-Minute cannot be used with special features.

Light Hi/Lo

Press the LIGHT Hi/Lo pad one time for high, twice for low and three times to turn it off.

Fan Hi/Lo

The fan will automatically start when heat rises from range surface units or burners. This protects the Built-in Microwave
Hood from excessive temperature rise. The fan will stay on until the temperature decreases. It cannot be turned off
manually during this time.
For other uses, press FAN Hi/Lo pad to select fan speed or turn fan off.
E
HIGH will be displayed.
.
.
22