Attachments On Request - GGP ITALY MP2 504 Serie Manual De Instrucciones

PROBLEM
4. The cut grass is
not collected in the
grass catcher
5. Irregular grass cutting
6. Excessive noise and/or
vibration is experienced
whilst working
If problems persist after having performed the above operations, contact your dealer.

15. ATTACHMENTS ON REQUEST

15.1 "MULCHING" KIT
It chops the grass cuttings finely and leaves them
on the lawn, instead of collecting them in the grass
catcher (for compatible machines) (fig. 24).
PROBABLE CAUSE
The cutting means has collided with a
foreign object and received a knock
The inside of the chassis is dirty
The cutting means is not in good condition
Damaged or loose parts.
The pin on the cutting means
has slipped out of its seat.
Cutting means fittings are loose or
the cutting means is damaged
Turn off the engine and disconnect
the spark plug cap.
Inspect for damage and
Contact a Technical service centre
for the replacement of the cutting
means if necessary. (par. 8.1)
Clean the inside of the chassis to ease the grass
discharge towards the grass catcher (par. 7.3.1)
Contact a Technical service centre for the
sharpening or replacement of the cutting means
Stop the machine and disconnect
the spark plug cable (fig. 22).
Inspect for damage.
Check for and tighten any loose parts.
Have all checks, repair work and replacements
carried out by a specialized Centre only.
Turn off the engine and disconnect
the spark plug cap.
Contact an authorised Technical service centre
for checks, replacements or repairs (par. 8.1)
EN - 12
REMEDY