GE Uniflux 10 Instrucciones De Funcionamiento página 247

Step
3
4
Instruction: Transfer feed setup
Step
1
2
3
4
Instruction: Reset the flow meter
totalizer
Step
1
2
3
UniFlux 10 Instrucciones de funcionamiento 28993587 AE
Action
In the Parameters for field:
Check Maintain or set Setpoint for the tank level to a desired value.
•
Set Hysteresis to an appropriate value, for instance 0.5 l.
•
Set Tank Fill to Enabled.
•
Click Insert.
Action
In the Text Instructions tab, select the Base: SameAsMain instruction of the
Block: PARAMETERS_CONCENTRATION block.
In the Instruction Box:
Set Breakpoint to 0.00 min.
•
In the Instructions: list, select Recirc and TransferFeedPump.
•
In the Parameters for field:
Set Setpoint (that is the pump flow) to 50%.
•
Set StartMode to TankFill.
•
Click Insert.
Action
In the Text Instructions tab, select the Base: SameAsMain instruction of the
Block: PARAMETERS_CONCENTRATION block.
In the Instruction Box:
Set Breakpoint to 0.00 min.
•
In the Instructions: list, select Permeate and FIT142Tot_Reset.
•
Click Insert.
B Create a method with UNICORN 6 and above
B.2 An example of using the Method Editor
B.2.5 Phase 3: Fed Batch Concentration
247