Installing The Optional Cabinet - Stryker 6253 Manual De Uso

INSTALLING THE OPTIONAL CABINET

To install the optional cabinet:
1. Use the bracket as a template to mark the location of the mounting holes at the area where the cabinet will be
installed. Consider the dimensions of the cabinet when selecting and marking the location. The approximate
height of the bottom of the cabinet to the floor should be at least 12 inches.
2. Using fasteners (not supplied) appropriate for the wall type, install the cabinet by using at least four of the
mounting holes.
3. Hang the chair from the bracket using the upper control handle.
www.stryker.com
Operation Guide
Figure 38 - Cabinet Dimensions
Figure 39 - Chair stored in the cabinet
6253-001-166 REV C
Return To Table of Contents
1-27
English