Installing The Optional Cover; Removing The Optional Cover - Stryker 6253 Manual De Uso

English

INSTALLING THE OPTIONAL COVER

Note: It is easiest to install the cover when the chair is hanging.
To install the optional vinyl cover:
1. Slip the bottom pocket over the wheels.
2. Wrap the side flaps around the chair frame.
3. Pull the top flat down between the bars of the upper control handle and over the head support strap.
4. Attach the Velcro strips.
5. Attach the red handle strip to the Velcro on the front of the cover.

REMOVING THE OPTIONAL COVER

To remove the optional vinyl cover:
1. Pull the red handle strip.
2. Allow the cover to drop off the chair.
Figure 40 - Slip the bottom pocket over the wheels
Return To Table of Contents
1-28
Operation Guide
Figure 41 - Cover fully installed on the chair
6253-001-166 REV C www.stryker.com