Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6. Timer
<Checking
the Current Auto Off Timer Setting>
_
Timer Setting
1. Be sure that the "Auto Off" is visible on the screen (at _).
2. Hold down the Timer Menu button @ for 3 seconds,
so that "Monitor" is
indicated on the screen (at _).
• The timer remaining to shutdown appears at _.
3. To close the monitor and return to the standard control screen, press the
Mode (Return) button _).
<To Turn Off the Auto Off Timer...>
• Hold down the Timer On/Off button (_ for 3 seconds, so that "Timer Off"
appears (at _) and the timer value (at _) disappears.
I
• Alternatively,
turn off the air conditioner itself. The timer value (at _) will
disappear from the screen.
%
<To Turn On the Auto Off Timer...>
• Hold down the Timer On/Off button (_ for 3 seconds. The "Timer Off"
indication disappears (at _), and the timer setting comes on the display
(at _).
• Alternatively,
turn on the air conditioner. The timer vahe will appear at _.
%
6.2. For wireless remote controller
AUTOSTOP
AUTO START
(_ Press the _
or [_Z] button (TIMER SET).
Time can be set while the following symbol is blinking,
OFF timer: @ G_O is blinking,
ON timer: @ G_I is blinking,
h
rain
(_) Use the [CCZ]and [ZCC]buttons to set the desired time,
(_) Canceling the timer,
AUTO S TOP
To cancel the OFF timer, press the _
button.
To cancel the ON timer, press the _
button.
• It is possible to combine both OFF and ON timers.
• Pressing the (_ ON/OFF
button of the remote controller during timer
mode to stop the unit will cancel the timers.
• If the current time has not been set, the timer operation cannot be used.
7. Other Functions
7.1. Locking the Remote Controller Buttons (Operation
function
limit controller)
• If you wish, you can lock the remote controller buttons. You can use the
Function Selection of remote controller to select which type of lock to use.
(For information about selecting the lock type, see section 8, item [4]-2
(1)).
Specifically, you can use either of the following two lock types.
(_ Lock All Buttons:
Locks all of the buttons on the remote controller.
(_) Lock All Except ON/OFF:
Locks all buttons other than the ON/OFF button.
Note:
The "Locked" indicator appears on the screen to indicate that buttons are cur-
rently locked.
_TEMP.
\....
J
\
D'_O
Oo_
OMENU
CON/OFF
_111
7_
FILER
BACK
MONITOR_SFT
DAY
"_=_
_.10HEOK
TEST
PAR21MAA
_
_)OLOCK
VOPERATIONA
}:t_R
_) ON/OFF
[]
[]
Lock Indicator
®
<How to Lock the Buttons>
1. While holding down the Filter button _), press and hold down the ON/OFF
button (_ for 2 seconds. The "Locked" indication appears on the screen
(at _), indicating that the lock is now engaged.
* If locking has been disabled in Function Selection of remote controller,
the screen will display the "Not Available" message when you press the
buttons as described above.
• If you press a locked button, the "Locked" indication (at _) will blink on
the display.
<How to Unlock the Buttons>
1. While holding down the Filter button (_, press and hold down the ON/
OFF button (_ for 2 seconds--so
that the "Locked" indication disappears
from the screen (at _).
/_/qF
i
11
Tabla de contenido
