Other Functions; Locking The Remote Controller Buttons (Operation Function Limit Controller) - Mitsubishi Electric Mr.Slim SLZ-KA25VAQ Manual De Instrucciones

6. Timer
<Checking the Current Auto Off Timer Setting>
TIMER
AFTER
1. Be sure that the "Auto Off" is visible on the screen (at 1 ).
2. Hold down the Timer Menu button B for 3 seconds, so that "Monitor"
is indicated on the screen (at 4 ).
• The timer remaining to shutdown appears at 5 .
3. To close the monitor and return to the standard control screen, press the
Mode (Return) button 2.
<To Turn Off the Auto Off Timer...>
●
Hold down the Timer On/Off button 9 for 3 seconds, so that "Timer Off"
appears (at 6 ) and the timer value (at 7 ) disappears.
●
Alternatively, turn off the air conditioner itself. The timer value (at 7 ) will
disappear from the screen.
<To Turn On the Auto Off Timer...>
●
Hold down the Timer On/Off button 9 for 3 seconds. The "Timer Off"
indication disappears (at 6 ), and the timer setting comes on the display
(at 7 ).
●
Alternatively, turn on the air conditioner. The timer value will appear at 7 .
7. Other Functions
7.1. Locking the Remote Controller Buttons (Operation
function limit controller)
■ If you wish, you can lock the remote controller buttons. You can use the
Function Selection of remote controller to select which type of lock to
use. (For information about selecting the lock type, see section 8, item
[4]–2 (1)).
Specifically, you can use either of the following two lock types.
1 Lock All Buttons:
Locks all of the buttons on the remote controller.
2 Lock All Except ON/OFF:
Locks all buttons other than the ON/OFF button.
Note:
The "Locked" indicator appears on the screen to indicate that buttons are
currently locked.
TIME SUN
°C
TEMP.
MENU ON/OFF
BACK MONITOR/SET DAY
CLOCK
PAR-21MAA
10
Timer Setting
OFF
AUTO OFF
°C
°C
AUTO OFF
AUTO OFF
AFTER OFF
°C
°C
AUTO OFF
Lock Indicator
FUNCTION
°C
ON/OFF
FILTER
CHECK TEST
OPERATION
CLEAR
6.2. For wireless remote controller
ON/OFF
AUTO COOL
HEAT DRY
MODE
It is convenient to set the timer when you go to bed, when you get home,
when you get up, etc.
1 Select the timer mode by pressing the
A Each time this button is pressed, the timer mode is changed in se-
quence:
(OFF TIMER)
2 Set the time of the timer using the
B Each time this button is pressed, the set time increases by 1 hour to
12 hours.
To release the timer:
• Press the button until
SELECT
are not displayed.
Note:
The OFF TIMER and the ON TIMER cannot be set at the same time.
<How to Lock the Buttons>
1. While holding down the Filter button 4, press and hold down the ON/OFF
button 1 for 2 seconds. The "Locked" indication appears on the screen
(at 1 ), indicating that the lock is now engaged.
* If locking has been disabled in Function Selection of remote controller,
the screen will display the "Not Available" message when you press
the buttons as described above.
°C
• If you press a locked button, the "Locked" indication (at 1 ) will blink
on the display.
°C
<How to Unlock the Buttons>
1. While holding down the Filter button 4, press and hold down the ON/OFF
button 1 for 2 seconds—so that the "Locked" indication disappears from
the screen (at 1 ).
°C
h
TOO TOO
WARM COOL
FAN SELECT
VANE TIME
RESET
button during operation.
SELECT
(ON TIMER) TIMER RELEASE
button.
TIME
(OFF TIMER) and (ON TIMER)
FUNCTION
°C
FUNCTION
°C
°C