Skoda EEA 600 001 Manual De Instrucciones página 16

- The towing arm is not mounted properly if it is not possible
to lock the control lever and to pull out the key. The control
lever needs further tightening, pulling it upwards mo-
derately!
- Before driving, check whether the towing arm is secured
to the clamping bush of the girder of the towing coupling
GB
properly. The check is effected by turning the locked control
lever of the towing arm „downwards" slightly. If the lever
can be turned through a small angle only (about 5°), the
clamping is all right. After the check, pull the lever back up
to the stop.
- After having attached the trailer, insert the trailer plug into
the socket of the towing coupling, and check if the trailer
lights are functioning.
- Never unlock the towing arm with the trailer attached.
- Should you lose your key, contact the nearest Škoda Auto
Service Centre or the manufacturer directly.
Dismounting the towing arm
For dismounting the towing arm, proceed in the opposite
way, in compliance with the following instructions.
- 6 -
- Fit cover (F) upon the ball journal -arrow-.
- Open the lid of the lock (E) of the control lever (C), and open
the lock by turning the key clockwise -arrow- (once the lock
is opened, the key is in a vertical position -detail-).
- 7 -
- Grip the towing arm (B) with left hand. Applying slight pres-
sure, turn the control lever (C) with right hand downwards
to the indicated fitting position -arrow-. In this position, the
towing arm is released, and will fall down to your left hand
by itself.
- 8 -
- Lock the lock of the control lever (C) (once the lock is loc-
ked, the key is in the horizontal position -detail-), take out
the key and close the lock with lid (E).
- Remove dirt from the towing arm (B) and bring the control
lever -arrow- to the storage position (parallel with the axis
of the arm body).
- Put the towing arm into the luggage compartment and
secure it with the respective clip.