Filtering Oil - Angelo Po 0G1FR3G Manual De Uso

9 - Turn the knob (A) clockwise (pos. 2) to the tem-
perature required.
The temperature light (E) comes on to indicate that
the oil is not at the working temperature. The light
goes out when the temperature is reached.
Turning off
1 - Turn the knob (A) anti-clockwise (pos. 3) to turn
off the burner.
The pilot light will remain on to allow the burner
to be re-lit.
2 - Open the hatch (C).
3 - Press the knob (D) and turn it clockwise (pos. 7)
to turn off the pilot light.
4 - Close the hatch (C).
5 - Turn the knob (A) anti-clockwise (pos. 4) to turn
off the mains gas supply.
The mains light (B) goes out.
6 - Turn off the gas supply tap.
7 - Cut off the mains electricity supply using the ap-
pliance's master switch.

FILTERING OIL

To carry out this operation, proceed as follows.
Important
Before proceeding, allow the appliance to
cool for 10÷15 min., so that the oil reaches
a temperature between 50÷120° C.
1 - Open the hatch (A).
2 - Fit the extension (B) onto the tap (C).
3 - Place the container (D) and the filter (E), both
available as optionals, underneath the exten-
sion (B).
4 - Turn on the tap (C) to empty the well.
5 - Turn off the tap (C) on completion of the opera-
tion.
Caution - warning
Do not dump oil in the environment; dispose
of it in accordance with the laws in force in
the country of use.
7
A
B
- 11 -
5
6
IDM-39603310700.tif
C
IDM-39603310800.tif
C D
IT
GB
DE
FR
ES
C
E
D
English