Troubleshooting - Gardol ESE 4216 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
Anleitung ESE 4216
11.03.2005
GB

13. Troubleshooting

Fault
Possible causes
The motor fails to start
a) The capacitor is defective
b) There is no electricity at the plug
c) The cable is defective
d) The combined switch/plug is
e) The connectors have become
f) The mower is standing in high
g) The mower housing is clogged
The motor performance drops
a) The grass is too high or too damp
b) The mower housing is clogged
c) The blade is severely worn
Cutting is irregular
a) The blade is worn
b) Wrong cutting height
22
8:41 Uhr
Seite 22
Remedies
a) The mower housing is
clogged Have repaired by
the Customer Service
Center
b) Check the cable and the
fuse
c) Check the cable
d) Have repaired by the
defective
Customer Service Center
e) Have repaired by the
separated from the motor
Customer Service Center
or the capacitor
f) Start in low grass or on an
grass
area that has already
been mowed; change the
cutting height if necessary
g) Clean the housing so that
the blade moves freely
a) Correct the cutting height
b) Clean the housing
c) Replace the blade
a) Replace or resharpen the
blade
b) Correct the cutting height
Tabla de contenido
loading

Este manual también es adecuado para:

6011677

Tabla de contenido