Breville BOV450 Manual De Instrucciones página 24

8. The timer will be displayed and begin to
count down. The time can be adjusted
during the bagel cycle by pressing the
A BIT MORE button or pressing the up
®
and down arrows.
START
CANCEL
NOTE
• During the BAGEL function, Element iQ
will automatically adjust the heating
elements for optimum results. It is normal
to notice the bottom set of elements turn off
while the top set is heating at full power. This
ensures the inside of the bagel is crisp while
the crust is only lightly toasted.
• Element iQ will automatically adjust the
®
toasting time depending on the heat already
present inside the oven. For example, if
the oven is already warm after one cycle of
toasting, the toasting time for the second
cycle will be different.
9. At the end of the cooking cycle, the oven
alert will sound three times, the START/
CANCEL button will no longer illuminate
red and the LCD will be illuminated blue.
24
10. If the bagel cycle has finished and you
would prefer your bagel to be toasted
slightly more, press the A BIT MORE
button for an additional 30 seconds.
If the oven has not finished the cycle,
30 seconds will be added to the existing
time remaining. If the oven has finished
the cycle, pressing the A BIT MORE
button will start the bagel cycle and count
down from 30 seconds. Each subsequent
selection of the A BIT MORE
will add additional toasting time, up to a
maximum of 10 minutes.
NOTE
For safety reasons the oven is limited to a
maximum of 10 minutes continuous toasting.
Time that has already elapsed during the cycle
is included. If the oven does not allow you to
input extra time it is because the maximum
continuous time has been reached. Allow the
®
oven to cool before restarting the cycle.
IMPORTANT
The outer surface of the oven, including
the oven door, is hot during and just after
operation. Always use protective hot pads or
insulated oven mitts when inserting, removing
or handling items from the oven.
The bagel cycle can be stopped at any time
by pressing the START/CANCEL button.
This will cancel the cycle, the button surround
illumination will go out and the LCD will be
illuminated blue.
®
®
button
®