Earth connection
Installation, connection and earthing of the electric system
must comply with the European standard requisites and meet
the provisions of the local Standards in force.
This household appliance requires an earthing connection for
protection against short-circuits or electric dispersions. It must
therefore be connected to an appropriate electrical outlet. The
earthing wire must not be interrupted by the switch.
ATTENTION
DISCONNECT
THE
ELECTRIC
BEFORE PERFORMING TECHNICAL ASSISTANCE OR
MAINTENANCE ON THE PRODUCT.
Technical after-sales assistance and spare parts
Spare parts
Only authorised components can be used for appliance support.
Do not repair or replace any oven component not recommended
by this manual. All interventions and repairs must be carried out
by authorised technical staff.
To request a spare part, indicate the following data:
1) Model of oven code (MOD.) and production number (N.L.),
found on the product label positioned on the lower front part
of the oven and on the first page of the booklet.
2) Description and number of the spare part, technical
information available only to the authorised assistance
service.
3) Last, indicate the details of the distributor that sold the oven
and the details of your nearest after-sales assistance centre.
Technical assistance
In case your oven requires technical assistance and/or spare
parts, contact the dealer or the authorised technical assistance
centre nearest to you.
In this case also it is necessary to state all the appliance data
on the aluminium product label, such as: model (MOD.) batch
number (N.L.), etc. label placed on the lower part of the oven
facade or on the first page of the instructions booklet.
32
In case of replacement of the electric cable, ensure the use of
an electric cable certified according to the standards in force
and suitable to the technical features of the product.
Only use flexible cables: cable type H05RR-F 3 x 1.5mm²
POWER
SUPPLY