Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Successively (after one minute), the oven returns to low
consumption mode.
With the oven o or in cooking mode, to access the function,
proceed in the same way using the key 2 menu
the functions and going onto the reference icon. Now proceed
as above.
Setting the alarm clock
The ALARM CLOCK function is independent from the cooking
functions and does not program the oven.
The function
can be activated at any time using key 2
menu
:
• from oven off (OFF);
• from oven on (ON) while awaiting commands;
• from oven in cooking mode (ON), without affecting
its operation;
For example, with oven off, using the key 2 menu
the alarm clock icon
.
Operate on keys 4 and 5
that can be set 12h).
Confirm using key 6
or after 7 sec the value will be auto-
confirmed (the countdown starts).
When the time has passed, an intermittent acoustic signal will
warn you; press any key to stop the signal and exit the ALARM
CLOCK function.
In all cases, the acoustic signal will switch off automatically
after 3 mins.
Successively (after one minute), the oven returns to low
consumption mode.
With the oven on or in cooking mode, to access the function,
proceed in the same way using the key 2 menu
the functions and going onto the reference icon. Now proceed
as above.
Setting timer and alarm clock
The two functions can be set simultaneously at any time.
Practically, it is like having two timers. To do this, just follow the
same setting procedure using key 2 menu
and then the ALARM CLOCK (or vice versa).
For example, with oven off:
The two icons
are activated together.
The value of the timer will be shown on the display, which will
end the countdown first.
The respective acoustic signals will inform of the time passed.
Proceed as above (see reference paragraphs).
With the oven o or in cooking mode, to access the function,
proceed in the same way using the key 2 menu
the functions and going onto the reference icon. Now proceed
as above.
Cooking time programming
The cooking time programming functions are:
• cooking duration
;
• automatic cooking
: combination between cooking end
time
and cooking duration
These functions can activate:
• from oven on (ON) while awaiting commands;
• from oven in cooking mode;
• The timed programming functions are subject to oven switch-
on and have effect with the oven operating.
From oven on in commands stand-by mode, enter time
programming mode via the key 2 menu
positioning on the reference icons; also in this case, positioning
is highlighted by the flashing icons.
See the reference paragraphs for the programming methods.
INSTALLATION, USE AND MAINTENANCE INSTRUCTIONS
, scrolling
, go onto
to set the desired value (max time
, scrolling
, first the TIMER
, scrolling
;
which allows
BUILT-IN ELECTRIC OVENS
ATTENTION
If the TIMER
and the AUTO time
programming functions are to be set simultaneously, the
priority on the time display will be:
- AUTO time programming;
- progressive cooking time;
- TIMER functions;
To display the "hidden" TIMERS and/or progressive cooking
times, go to the reference icon using key 2 menu
Cooking end time
The cooking end time can only be set after having activated
the cooking duration function
two functions performs automatic cooking programming (see
reference paragraph).
The cooking end time is restricted to a maximum postponement
of 12h. Using key 2 menu
Set the time using keys 4 and 5
Confirm using key 6
or after 7 sec the value will be auto-
confirmed.
At this point, automatic cooking programming is confirmed (see
reference paragraph).
Automatic cooking
It is a cooking mode delayed over time. It is used when it is
necessary to have a dish ready at a certain time of day. The two
modes must be set simultaneously: cooking duration
cooking end time
in this specific order.
Set the cooking duration
(see reference paragraph).
When the cooking end time is to be set
and proposes the consistent time to enter, calculated on the
basis of the current time and the value of the desired cooking
duration. For example, set the cooking duration at 45 minutes.
If the cooking end time is not set with a time longer that cooking
duration, the display only proposes the programming of cooking
duration. Therefore, set a cooking end time that includes a
longer cooking duration time so that automatic programming is
highlighted just by the
icon. At the end press key 6
after 7 sec the value will be auto-confirmed.
For example, set postponed cooking by 6 hours and cooking
duration of 45 minutes.
At this point:
• the oven is in low consumption mode;
• functions display shows the cooking function selected;
and
.
. The combination of the
go onto the flashing
icon.
.
and
, the control determines
21
EN
,
or
Capítulos
Tabla de contenido
