Noalia Electronic Programmer Instructions (Model Fi-64/74 Mtln) - Smalvic FI-74MT Manual De Instrucciones

Programmer N instructions (model FI-64/74 MTLN)
Switching on
On commissioning, the display flashes and the time of day starts
from 12:00.
Make sure that the left knob is in the off position and then press
the right knob to access the oven functions.
If the selector is not at off, by pressing the right knob, a warning
signal is activated.
Setting the time
When the oven is in Stand-by mode, press the right knob to
access the time setting menu (the time flashes). Turn to the right
to increase and the left to decrease. Initially, the hour increases
or decreases at the first step, at number 6 the speed increases,
the minutes flash indicating that the time has been set.
After 4 seconds from the last modification, the menu is exited
automatically, the hours and minutes flash indicating that the
time has been set. After another 4 seconds, press the right
knob; it returns to stand-by.
Right knob functions
Depending on the position of the cooking mode selector
(represented by the left knob), pressing the right knob allows
access to different menus.
When the cooking mode selector switch is off, it is possible:
- Modify the time;
- Modify the timer;
- Modify the button acoustic signal tone.
When the cooking mode selector switch is on, it is possible:
- Modify the functions of the oven, except for the special
defrosting and oven light functions;
- Modify the timer;
- Modify the duration of the functions;
- Modify cooking stop;
14
Method of use
To start cooking, turn the knob to the desired cooking function
(the default temperature is already set and is shown on the
display).
When the selector is in the OFF position, the display shows
the time but the oven temperatures and programs cannot be
selected. In this way, only the timer is active.
The cooling fan is off when the temperature of the oven cavity is
lower than 110 degrees.
Oven light mode
When the oven light mode is active, the time of day can be
seen on the display but temperatures and programs cannot be
selected.
Also in this case, the cooling fan is off when the temperature of
the oven cavity of lower than 110 degrees centigrade.
Defrost mode
When defrosting mode is selected, the cooling fan is off and the
ventilated function is not active. "dEF" and a fan icon can be
seem on the display.
Manual cooking mode
Turn the knob to select the desired function; the temperature is
already pre-set.
The display shows the icon of the cooking mode selected. The
temperature flashes and can be modified by pressing and
turning the right knob.
Before the oven reaches the desired temperature, the effective
temperature inside the cavity is displayed along with the flashing
pre-set temperature, if the right knob is pressed.
Stop cooking
The selector must be moved to the OFF position to stop
cooking. When the oven is switched off, the program selected is
automatically cancelled.
Programmes
Annulling programs
The time programmed for the timer, the automatic cooking and
the temperature of the oven can be annulled by:
- Clear Function (the display shows the time and all programs
are cancelled)
- Oven light
Timer
This function does not interact with the oven and is always
available independently from oven status (on or off). To select
the time, turn the right knob to obtain the desired time (the first
minute is displayed as seconds).
After 4'(or pressing the right knob), the bell icon lights up and
the countdown begins. The acoustic signal and the flashing icon
indicate the end.
Press the right knob to stop.