Smalvic FI-74MT Manual De Instrucciones página 17

Automatic or semi-automatic cooking
Semi-automatic (allows cooking duration to be set)
After having selected a cooking program, the display shows the
corresponding icon. Press the right knob 3 times to access the
menu to modify. The icons
0:00 to 23:59 by turning the right knob. After 4 seconds without
any action, the value is set.
During cooking the display shows the temperature of the
oven. By pressing the right knob 3 times, the remaining time
is displayed. During cooking, the icons
icon indicates the increase of the temperature and the
program (time can be modified also during cooking).
At the end, the display shows END, the
acoustic signal is emitted by the button. By pressing the right
knob, the signal stops. Turn towards OFF to stop cooking or
select another cooking mode.
Automatic (allows cooking duration and end to be set)
Select the duration of the cooking time as described above.
Successively, press the right knob 4 times. The symbol
switches off and the icon switches on. The cooking end can
be seen on the display. By turning the right knob, it is possible to
set when cooking must end.
In Stand-by, the display shows the temperature selected and the
symbol .
The icon corresponding to the cooking mode selected also lights
up. When cooking starts, the
Instead, the symbol shows the temperature increase of
the oven with respect to that initially set.
At the end of cooking, the display shows END, the
flashes and an acoustic signal is emitted. Turn the selector to
OFF to stop or select another mode.
On status
Generally, in all modes except OFF, the cooling fan is operational.
When a cooking ode is selected and the oven is off, the cooling
fan is also off if the temperature of the oven is below 110
degrees.
Button
The button alarm sounds if the timer of automatic cooking
program have terminated. The signal is switched off by pressing
the knob on the right or waiting 7 minutes.
INSTALLATION, USE AND MAINTENANCE INSTRUCTIONS
switch on. Select a time from
remain on. The
icon flashes and an
and symbols switch on.
symbol
BUILT-IN ELECTRIC OVENS
Errors code (when the display shows one of the
following codes)
F000: oven temperature sensor short circuit
F001: temperature sensor open circuit
Ftop: reading error of the cooking mode selection.
Blackout
If there is a drop in voltage, all parameters are removed.
On switch-on, the oven uses the default settings.
Diagnosis procedure
The oven has a specific test in the software to test all elements.
This test should only start-up on commissioning.
EN
15