2.2 Area of application
3R80*
Recommended for mobility grades 3 and 4 (unrestricted outdoor walker and
unrestricted outdoor walker with particularly high demands). Approved for a body
m°
weight of up to 150 kg.
kg
2R57=16-285-WF
Approved for a body weight of up to 150 kg.
2.3 Environmental conditions
Allowable environmental conditions
Temperature range for use: -10 °C to +60 °C
Storage and transport conditions: -10 °C to +60 °C, 250 mbar to 1013 mbar, condensing
Acid resistance: salt water, chlorine water, soapsuds, perspiration, urine
Moisture: fresh water, salt water, chlorine water, soapsuds, steam
Allowable immersion depth: 3 m
Unallowable environmental conditions
Mechanical vibrations or impacts
Dust, sand, highly hygroscopic particles (e.g. talcum)
Sauna
2.4 Service life
This prosthetic component has been tested by the manufacturer for 3 million load cycles accord
ing to ISO 10328. Depending on the patient's activity level, this corresponds to a service life of 3
to 5 years.
3 Safety
3.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
3.2 General safety instructions
CAUTION
Excessive strain on the product
Risk of injury due to breakage of load-bearing components
Use the prosthetic components according to the MOBIS classification.
►
CAUTION
Unallowable combination of prosthetic components
Risk of injury due to breakage or deformation of the product
Only combine the product with prosthetic components that are approved for that purpose.
►
Based on the instructions for use of the prosthetic components, verify that they may be com
►
bined with each other.
21