Idiomas disponibles
Idiomas disponibles
GB
Installation and Operating Instructions
Coupling Ball with Bracket (CBB)
Westfalia Order No.:
Type:
EC Auth. Des.:
Application:
EC Authorised Designation:
Attention: If the vehicle to which the towing device is to be fitted is a 300 Turbodiesel model (engine 606)
equipped with air-conditioning or automatic air-conditioning system, a transmission oil cooler
with fan motor and a fan for the engine oil cooler must both be retrofitted.
If the vehicle is also equipped with a parking/auxiliary heater, this heater must be removed
because it is located in the space where the components mentioned above have to be installed.
Technical Data:
The tested D-value is 11,5 kN. This corresponds, for example, to a towed weight of 2200 kg and a permissible
total weight of 2500 kg. The tested trailer nose weight is 84 kg. For driving, the data of the vehicle
manufacturer with regard to the towed weight and trailer nose weight are decisive, whereby the tested values
of the CBB may not be exceeded.
Notes:
The CBB is a safety part and may only be mounted by specially trained personnel. Should spare parts be
required, these may also only be mounted on the undamaged original-equipment part by specially trained
personnel.
No changes or modifications to the CBB are permitted.
When driving with a trailer, observe the driving instructions in the vehicle manufacturer's operating
instructions.
The trailer must be equipped with an appropriate towing coupling ball.
If installing the CBB necessitates the removal of the towing eye, the CBB serves as a replacement, provided
the permissible towed weight is not exceeded and the towing takes place on normal roads.
The ball and coupling must be kept clean and greased.
Important:
When using track stabilising devices, e.g. the Westfalia "SSK", the coupling ball
must be grease-free.
Follow the instructions in the operating instructions.
Check the ball diameter from time to time. As soon as a diameter of 49.0 mm is reached at any given point,
the CBB may no longer be used for safety reasons.
The fixing points specified as standard must be observed.
National guidelines concerning official approval of auxiliaries must be observed.
These installation and operating instructions must be enclosed with the vehicle papers.
4
313 121 600 001
313 116
e13 00-0106
Mercedes-Benz S 210 as of June 1995;
(E Class estate/station wagon)
210 K
