Vertical Configurations; Cadb/Cadt-N-D 05 / 08 / 12 / 18 / 23 / 30 / 45 / 55 / 80 (B-A)V Models; Cadb/Cadt-N-D 05 / 08 / 12 / 18 / 23 / 30 / 45 / 55 / 80 (B-A)V (Bp) Models; Cadb/Cadt-N-Di 05 / 08 / 12 / 18 / 23 / 30 / 45 / 55 / 80 Dv Models - S&P CADB-N-D Instrucciones De Uso

7.5. VERTICAL CONFIGURATIONS

7.5.1. CADB/CADT-N-D 05 / 08 / 12 / 18 / 23 / 30 / 45 /
55 / 80 (B-A)V MODELS
Models without an electric heater, but with the possibility of install-
ing a water coil, for post-heating in remote installation configuration,
with a double insulation wall and without by-pass.
The airflows indicated in these configurations can be changed, ac-
cording to the installation.
The installer must only take into account the correct connection of the evacu-
ation system for water produced by condensation (See section 7.3.3).
From the factory configuration, we can configure the appliance, taking
into account that we can turn it , thus modifying the position of the sup-
port feet, and at the same time, it will also be necessary to modify the po-
sition of the "water collection" tray, according to the chosen configuration.
BV

7.5.3. CADB/CADT-N-DI 05 / 08 / 12 / 18 / 23 / 30 / 45 / 55 / 80 DV MODELS

(Single and three phase)
Models with double insulating wall, post heating water coil and without by-pass.
The airflows indicated in these configurations CANNOT be changed, according to the installation.
The installer must take into account the correct connection of the evacuation system for water produced by condensation (See section 7.3.3).
Do not position the post-heating resistances in a different manner to the factory-supplied layout.
CADB/CADT-N-DI 05 / 08 / 12 / 18 / 23 / 30 / 45 / 55 / 80 DV MODELS

7.5.4. CADB/CADT-N-DC 05 / 08 / 12 / 18 / 23 / 30 / 45 / 55 / 80 DV MODELS

(Single and three phase)
Models with double insulating wall, post heating electric heater and without by-pass.
The airflows indicated in these configurations CANNOT be changed, according to the installation.
The installer must take into account the correct connection of the evacuation system for water produced by condensation (See section 7.3.3).
Do not position the post-heating resistances in a different manner to the factory-supplied layout.
CADB/CADT-N-DC 05 / 08 / 12 / 18 / 23 / 30 / 45 / 55 / 80 DV MODELS
AV
DV
DV
7.5.2. CADB/CADT-N-D 05 / 08 / 12 / 18 / 23 / 30 / 45 / 55
/ 80 (B-A)V (BP) MODELS
Models without an electric heater, but with the possibility of install-
ing a water coil, for post-heating in remote installation configuration,
with a double insulation wall and with a by-pass.
The airflows indicated in these configurations CANNOT be changed,
according to the installation.
BV (By-Pass)
30
AV (By-Pass)
DV (By-Pass)
DV (By-Pass)