SICE S 52A Manual De Instrucciones página 47

Rotate the wheel clock-wise allowing the clamp to lift the tire onto the rim while simultaneously pulling on the tire with
the bead hook.
Continue rotation and pulling with the bead hook until the bead is completely on the wheel. This should be completed
within one full rotation.
TUBED TIRES: When the first bead is completely on the tire, continue rotating the tire until the valve stem is at
bottom dead center. Install the tube and continue with the directions below.
Move the bead hook to the outboard position on the tire carriage.
Tire not shown for clarity.
Remove clamp and reposition to the left of the bead hook. This creates a traction point for the un-mounted bead. Move
bead hook into position.
Rotate wheel clock-wise until bead is mounted completely on wheel. This should be completed within one full rotation.
S 52A Operator's Manual 47