Servicing And Cleaning The Ice Dispenser; To Change The Light Bulb; When The Appliance Is Not In Use - Electrolux EUFG2900 Instrucciones De Uso

Servicing and cleaning the ice
dispenser
When necessary, clean the surfaces of the dispenser
and the ice container that are accessible from the
outside, using only a soft cloth and warm water.
Never use cleaning agents with a grinding or
aggressive effect.
When necessary, the feeder and the ice container can
be cleaned after removal of the surfaces accessible
from the outside, using only a soft cloth and warm
water.
Ensure that the ice container is thoroughly dry
before being re-fitted.
If the system is not to be used for a long period, it is
advisable to switch off the ice machine and water
supply, empty the ice container and fit the cover
supplied over the delivery hole for ice in the door.
When re-starting, avoid using the ice produced
during the first day.
Defrosting
Defrosting is not necessary.
Every 24 hours, the evaporator is defrosted
automatically.
Never use a hair drier or other heating
appliances to speed up defrosting. Excessive
heat may damage the plastic interior, and
humidity could enter the electric appliance
making it live.

To change the light bulb

The light is switched on automatically when the
door is opened. Before replacing the light bulb,
disconnect the power plug from the outlet.
Cut the packaging around the bulb socket.
Keep the packaging on to hold the bulb when setting
it into the socket. Do not touch the bulb with your
bare fingers. Halogen light bulbs are sensitive to
grease from the skin.
Use a clear halogen light bulb.

When the appliance is not in use

Disconnect the appliance from electricity supply.
Empty all foods and clean the appliance, leaving the
doors ajar to prevent unpleasant smells.
If the cabinet will be kept on, ask somebody to
check it once in a while to prevent the food inside
from spoiling in case of a power failure.
G4
20W/12V
10
UV-blocked
Low pressure
Electrolux 818 38 03-01/7