Technical Specifications - Johnson Controls M9210-AG-1 Serie Instrucciones De Instalación

Technical Specifications

Product Codes M9210-AGx-1
Power Requirements
- Running
- Holding Position
- Running
- Holding Position
Transformer Sizing
Requirements
- Minimum per Actuator
Input Signal / Adjustments
Two Single-Pole, Double-Throw (SPDT), Double-Insulated Switches with Gold Flash Contacts:
Auxiliary Switch Rating
AC 24 V, 50 VA Pilot Duty;
AC 120 V, 5.8 A Resistive, 1/4 hp, 275 VA Pilot Duty;
AC 240 V, 5.0 A Resistive, 1/4 hp, 275 VA Pilot Duty
Direction is Selectable with Mounting Position of Actuator:
Spring Return
Side A, Actuator Face Away from Damper for CCW Spring Return;
Side B, Actuator Face Away from Damper for CW Spring Return
Running and Spring Return
Torque
Rotation Range
M9210-603 Adjustable Stop Kit
Rotation Time
150 Seconds for 0 to 10 Nm
- Power On (Running)
at All Operating Conditions
26 Seconds for 0 to 10 Nm
- Power Off (Spring
at Room Temperature
Returning)
60,000 Full Stroke Cycles; 1,500,000 repositions
Cycles
Audible Noise Rating
- Power On (Running)
- Power On (Holding)
- Power Off (Spring
Returning)
1.2 m Halogen-Free Cable with 18 AWG (0.75 mm
Electrical Connections
(Actuator and Auxiliary
Switches)
Integral Connectors for 10 mm Flexible Metal Conduit
Conduit Connections
Mechanical Connections
- Standard Shaft Clamp
Included with Actuator
19 to 27 mm Diameter Round
- Optional M9210-600
Shafts, or 16, 18, and 19 mm
Jackshaft Coupler Kit
- Optional M9220-600
Jackshaft Coupler Kit
NEMA 2 (IP54) for All Mounting Orientations
Aluminum Enclosure
Ambient Conditions
-40 to 55° C; 90% RH Maximum, Noncondensing
- Operating
-65 to 85° C; 95% RH Maximum, Noncondensing
- Storage
Shipping Weight
See Figure 1
Dimensions
Compliance
UL Listed, File E27734, CCN XAPX (United States) and XAPX7 (Canada)
- North America
CE Mark, EMC directive 89/336/EEC (M92x0-xGA-1 Models)
- Europe
CE Mark, Low Voltage Directive 72/23/EEC (M92x0-BDA-1 and M92x0-xxC-1 Models)
C-Tick Mark, Australia/NZ Emissions Compliant (M92x0-xGx-1 and M92x0-BDx Models)
- Australia and New Zealand
2 M9210-AGx-1 / M9220-AGx-1 / M9210-Bxx-1 / M9220-Bxx-1
M9220-AGx-1
Floating
AC 24 V (AC 19.2 to 30 V) at 50/60 Hz
Class 2 (North America) or SELV (Europe)
9.6 VA 15.5 VA
6 VA 7.7 VA
DC 24 V (DC 21.6 to 26.4 V), Class 2 (North America) or SELV (Europe)
3.9 W 6.7 W
2.1 W 2.9 W
15 VA 20 VA
AC 19.2 V to 30 V at 50/60 Hz or DC 24 V ±10%,
Class 2 (North America) or
SELV (Europe),
500ms minimum pulse width
10 Nm 20 Nm for a Single Actuator;
40 Nm for Two Like Models
Mounted in Tandem
60 Nm for Three Like Models
Mounted in Tandem
Optional Optional
M9220-603 Adjustable Stop Kit
150 Seconds for 0 to 20 Nm
at All Operating Conditions
Independent of Load
20 Seconds for 0 to 20 Nm
at Room Temperature
<40 dBA at 1 m
<20 dBA at 1 m
<55 dBA at 1 m
2
) Wire Leads
---
Square Shafts
--- 19 to 27 mm Diameter Round
Shafts, or 16, 18, and 19 mm
Square Shafts
M9210-BGx-1 M9220-BGx-1
AC 24 V (AC 19.2 to 28.8 V) at 50/60 Hz
Class 2 (North America) or SELV (Europe)
26 VA
9.3 VA
15.6 W 17.6 W
2.6 W 2.8 W
25 VA
---
10 Nm 20 Nm for a Single Actuator;
40 Nm for Two Like Models
Mounted in Tandem
Optional Optional
M9210-603 Adjustable Stop Kit M9220-603 Adjustable Stop Kit
Adjustable from 30 to 90° CW or CCW
Mechanically Limited to 90°
24 to 57 Seconds for 0 to 10 Nm 24 to 57 Seconds for 0 to 20 Nm
at All Operating Conditions at All Operating Conditions
35 Seconds Nominal at Full Rated Load
11 to 15 Seconds for 0 to 10 Nm 11 to 15 Seconds for 0 to 20 Nm
at Room Temperature at Room Temperature
35 Seconds maximum 35 Seconds maximum
for 0 to 10 Nm at -30° C for 0 to 20 Nm at -30° C
130 Seconds maximum 130 Seconds maximum
for 0 to 10 Nm at -40° C for 0 to 20 Nm at -40° C
12 to 19 mm Diameter Round Shafts, or 10, 12, and 14 mm Square Shafts
19 to 27 mm Diameter Round
Shafts, or 16, 18, and 19 mm
Square Shafts
--- 19 to 27 mm Diameter Round
Shafts, or 16, 18, and 19 mm
Square Shafts
2.9 kg
M9210-BDx-1
ON/OFF
AC 230 V (AC 198 to 264 V) at 50/60 Hz
0.12 A
0.09 A
---
---
---
--- 25 VA
--- ---
10 Nm
Optional
M9210-603 Adjustable Stop Kit
24 to 57 Seconds for 0 to 10 Nm
at All Operating Conditions
11 to 15 Seconds for 0 to 10 Nm
at Room Temperature
35 Seconds maximum
for 0 to 10 Nm at -30° C
130 Seconds maximum
for 0 to 10 Nm at -40° C
<66 dBA at 1 m
<18 dBA at 1 m
<66 dBA at 1 m
--- 19 to 27 mm Diameter Round
Shafts, or 16, 18, and 19 mm
Square Shafts
---
3.5 Kg
M9220-BDx-1
0.15 A
---
---
20 Nm for a Single Actuator;
40 Nm for Two Like Models
Mounted in Tandem
Optional
M9220-603 Adjustable Stop Kit
24 to 57 Seconds for 0 to 20 Nm
at All Operating Conditions
11 to 15 Seconds for 0 to 20 Nm
at Room Temperature
35 Seconds maximum
for 0 to 20 Nm at -30° C
130 Seconds maximum
for 0 to 20 Nm at -40° C
---
19 to 27 mm Diameter Round
Shafts, or 16, 18, and 19 mm
Square Shafts