Tabla de contenido
Idiomas disponibles
Idiomas disponibles
LOCATION OF CONTROLS
1.
DUST COVER
2.
LEFT SPEAKER
3.
DIAL POINTER
4.
3.5MM HEADPHONE JACK
5.
POWER LED INDICATOR
6.
FUNCTION SELECTOR (OFF/PHONO/TUNER)
7.
RUBBER FEETS
8.
RIGHT SPEAKER
9.
VOLUME KNOB
10.
TUNING KNOB
11.
FM-STEREO INDICATOR
12.
SPINDLE ADAPTOR
13.
TONEARM LEVER
14.
33/45/78 RPM SPEED SELECTOR
15.
PICK-UP HOLDER
16.
AUDIO-OUT
17.
FM ANTENNA
18.
ON/OFF PHONO
19.
DC INPUT
20.
MONO/STEREO SELECTOR
POWER SOURCES
You can power your portable stereo system by plugging the power AC/DC adaptor in-
to a wall AC power outlet. Check that the rated voltage of your appliance matches
your local volt.
FM RADIO OPERATION
1. Set the Function Selector (6) to the TUNER position. The red Power Indicator (5)
will light up.
2. Tune to the desired radio station by turning the Tuning control (10).
3. Adjust the volume control (9) to the desired level.
4. Switch FM RADIO MONO & STEREO selector (18) to choose between mono and
stereo mode.
5. To switch off the radio set the Function Selector (6) to the OFF position.
ANTENNA
For FM reception there is a built-in FM antenna wire (17) at the rear of the unit. Move
the wire around to obtain the best reception.
TURNTABLE OPERATION
1.
Set the Function Selector (6) to the PHONO position. Place a record on the turn-
table, over the central spindle. Place the EP adapter over the central spindle
when playing 17cm EP records. Set the Speed Selector (14) to 33/45/78
2.
Release the tonearm clamp, and remove the protective cap from the stylus.
3.
Lift the Tonearm with the Tonearm Lift Lever (13).
4.
Move the tonearm to the beginning of the record.
5.
Gently lower the arm onto the record with the Tonearm Lift lever to start playing.
6.
When the record is finished the tonearm will automatically stop. Lift the tonearm
from the record and return it to the rest.
English
1
.
Tabla de contenido
