Accessmatic Fox 1000 C Manual De Usuario página 66

1000 P
RO
Opening your life
1000 P
RO
Increase
height 1000 P
RO
Opening your life
1000 P
RO
Decrease
height
1000 P
RO
Opening your life
1000 P
RO
1000 P
RO
Opening your life
1000 P
RO
1000 P
RO
B. SETTING THE BACKSPACE HEIGHT PASS
a) Hold down the SET button until "1" appears on the display, then to enter this function setting press the UP button until "B" appears on the display and then
release the button.
Opening your life
b) Press the SET button again. The unit is now in reverse height step adjustment
mode. Then you will see gure "1" appear on the screen again, but with a ashing
dot.
c) Press the UP / DOWN button once to set the ignorance of the inversion height
when closing (0 ~ 9).
d) Press the UP button to increase or the DOWN button to decrease.
Figure 1 ~ 9 means that the door still does not move back even though there are
1 cm to 9 cm obstacles in its path. This feature is best suited for Northern Europe,
Opening your life
where there is always snow on the ground.
e) Press the SET button to con rm the setting, it will automatically return to the
standby state and an "II" will be displayed.
Note: The inversion height is set to "1" as standard at the factory.
C. SETTING THE PASS DOOR SWITCH TYPE
a) Hold down the SET button until "1" appears on the display, then to enter this
function setting press the UP button until "C" appears on the display and then
release the button.
Opening your life
b) Press the SET button again. The unit is now in the pass door switch type setting
mode. then you will see a "0" gure appear on the screen again, but with a
ashing dot.
c) Press the UP / DOWN button once to con gure the type of doorway switch. You
can choose between "0" or "1"
The gure "0" means that the doorway function is normally open
Figure "1" means that the doorway function is normally closed
d) Press the SET button to con rm the setting, it will automatically return to the
Opening your life
standby state and an "II" will be displayed.
Note: The pass door switch is set to "0" as the factory standard.
Opening your life
25