Accessmatic Fox 1000 C Manual De Usuario página 65

1000
Opening your life
1000 P
RO
Opening your life
The reconnection
function
buttons is
closed
1000 P
RO
The reconnection
function
buttons is
open
Opening your life
1000 P
RO
Opening your life
1000 P
RO
Increase
quantity
Opening your life
1000 P
RO
Decrease
quantity
P
RO
9. CONFIGURATION OF THE RECOGNITION FUNCTION OF THE TRANSMITTER
BUTTONS
a) Hold down the SET button to enter this function. "9" will appear on the screen,
and then release the button.
Opening your life
b) Press the SET button again. The unit is now in the button recognition function
setting mode. then you will see on the screen a gure "1" with a ashing dot.
1000 P
RO
c) Press the UP / DOWN button once to select whether you want all 4 buttons to
be able to control the single opening motor or just the coded button so that you
can separately control the opening motor.
The gure "0" means that the button recognition function is open, if you coded
the rst button with the rst opening motor. Then all 4 buttons on the remote can
Opening your life
control the opening motor.
The gure "1" means that the button recognition function is open, it means that if
1000 P
RO
you coded 1 button with the rst opening motor. Then the rst button will be the
only button on the remote that can control the opening motor. This is ideal for
users who have more than 1 door / door home automation.
e) Press the SET button to con rm the setting, it will automatically return to the
standby state and an "II" will be displayed.
Note:
Opening your life
1. Button recognition is set to "1" as factory standard.
2. After changing the non-recognition buttons into the recognition buttons, note
1000 P
RO
that only the encoded button can control the opening motor.
A. CONFIGURATION OF THE AMOUNT OF MEMORY CODES
a) Hold down the SET button until "1" appears on the display, then to enter this
function setting press the UP button until "A" appears on the display and then
release the button.
Opening your life
b) Press the SET button again. The unit is now in remote quantity adjustment
mode. then you will see a gure "A" appear on the screen again, but with a
1000 P
RO
blinking.
c) Press the UP / DOWN button once to set the remote amount (A or 1 ~ 9).
d) Figure "A" means the maximum quantity of 50 units. Press the UP / DOWN
button to increase or decrease the amount.
The remote quantity is set to 5 units * N, N = 1 ~ 9, (the quantity is a multiple of 5).
Opening your life
e) Press the SET button to con rm the setting, it will automatically return to the
standby state and an "II" will be displayed.
1000 P
RO
Note: The remote quantity is set to "A" as the factory standard.
Opening your life
24