Programming Instructions - Accessmatic Fox 1000 C Manual De Usuario

1000
Display menu instructions
Opening your life
1000 P
RO
Opening your life
1000 P
RO

PROGRAMMING INSTRUCTIONS

Pre-instruction for Programming Buttons
1. Make a small Click on the SET button: when it is in standby mode, it will clear the error, display the alarm and return to the normal
screen.
2 Make a small Click on the CODE button:
(in con guration state) exits the current operation and returns to the standby interface.
When on hold, press the code. A dot will be displayed in the corner, now enter the code memorization mode.
Now click, on the button of the manual transmitter you want to use, the point may disappear, then press the same button on the manual
transmitter again, the point will ash, here the memorization of the code will be nished.
3. Brie y press the UP button - the door will open.
4. Brie y press the DOWN button: the door will close.
(When the door is opened or closed, it will stop if you press any key)
5. Hold down the SET button: enter the function setting interface.
6. Hold down the CODE button: Hold down the CODE button until a C appears on the screen. All stored remote controls will be removed.
7. Hold down the UP button: Increase Resistance. (Hold down the DOWN button, after 4 seconds it will scroll to show 0-1-2, choose the
number you want 1 = increase 25% 2 = increase 50%).
8. Hold down the DOWN button: Reset to factory settings.
Press and hold the DOWN button, after 4 seconds the display will show
Reset means that all the settings have returned to the initial factory settings, so it is necessary to memorize, except for memorizing the
transmitter code.
P
RO
a) Hold down the SET button until "1" appears in the display, then release the
button.
b) Press the UP / DOWN button, then "1-E" will appear on the screen.
c) Press the SET button to con rm the function you need to set, then enter the
Opening your life
interface for detailed setting of the designated function.
d) On the con guration screen, "0-A" is displayed with a ashing dot.
1000 P
RO
e) Press the UP / DOWN button to choose the characteristic that you want to
modify.
f) Press the Set button to con rm the setting and then it will automatically return
to the standby state and display "II"
Then the garage door opener will restart.
Opening your life
17