Accessmatic Fox 1000 C Manual De Usuario página 59

1000 P
RO
Opening your life
1000 P
RO
Opening your life
1000 P
RO
Opening your life
1000 P
RO
Opening your life
1000 P
RO
Opening your life
1000 P
RO
Opening your life
1000 P
RO
1. PROGRAMMING OF THE OPEN AND CLOSE LIMITS
a) Hold down the SET button to enter the setup function until "1" appears on the
display, and then release the button.
b) Press the SET button again. The opening motor is now in programming mode.
then you will see "n" on the screen with a dot.
c) Keep pressing the UP button until the door reaches the desired opening
position, it will display "n" without a dot on the screen.
d) Press the SET button to con rm the opening position, then you will see "u" on
the screen with a dot.
e) Then hold down the DOWN button until the door reaches the desired closed
position, you will see "U" with no dot on the screen.
Note: For ner adjustments, toggle between the UP and DOWN buttons.
f) Now press the SET button to con rm the closed position, then you will see "II"
on the screen.
After con rming the closed position, the door will open and close to set travel
limits and force sensitivity settings. The door is now con gured for normal opera-
tion.
CAUTION:
After opening and closing the cycle, the gures will be displayed on the screen (0
~ 9), "0" is the best door balance, it is highly recommended that the gure be less
than the power force.
Opening your life
18