Accessmatic Fox 1000 C Manual De Usuario página 50

1000
STEP1 (Fig. 17 )
Attach the opener head to the steel T-Rail .
STEP2 (Fig. 17 )
Place the steel T-rail and opener head assembly centrally on the garage oor, with the open head furthest away from the door. Lift the
front of the rail up to the door bracket. Insert the pivot pin and secure it with the split pin supplied.
Fig. 18
Fig. 19
P
RO
STEP3 (Fig. 17 , Fig. 18)
Lift and support the opener head (with a ladder) so it is positioned centrally and level.
Fix the opener and track on ceiling by 2 mounting brackets.
WARNING: Do not allow children around the door, opener or supporting ladder
serious injury and/or damage may result from failure to follow this warning.
STEP4 (Fig. 17, Fig. 19)
Connect the straight arm to the bent arm with the bolt. Position and bolt the arms to
the top edge of the door using the bolt supplied.
STEP5
Lif t the garage door until the trolley locks into the drive chain. Then , ready to
program the openers.
couplers as shown
Opening your life
9