Product Description And Features - Accessmatic Fox 1000 C Manual De Usuario

1000 P
RO
Opening your life
- Take care when operating the manual release since an open door may fall rapidly due to weak or broken springs, or being out of balan-
ce.
- Frequently examine the installation, in particular check cables, springs and mountings for signs of wear, damage or imbalance. Do not
use if repair or adjustment is needed since a fault in the installation or an incorrectly balanced door may cause injury.
- Each month check that the drive reverses when the door contacts a 50 mm high object placed on the oor. Adjust if necessary and
recheck since an incorrect adjustment may present a hazard, for drives incorporating an entrapment protection system depending on
contact with the bottom edge of the door.
- Details on how to use the manual release.
- Information concerning the adjustment of the door and drive.
- Disconnect the supply when cleaning or carrying out other maintenance.
- The installation instructions shall include details for the installation of the drive and its associated components.
PRODUCT DESCRIPTION & FEATURES
1. Obstruction force adjustment
The minimum force display "1" and it can be adjusted upward. Display "5" means the maximum force.
2. Travel speed adjustment
"8" appears on the display means the 80% of the travel speed. Display "A" means the full speed 160mm/s or 200mm/s.
3. Reversal height adjustment
"0" appears on the display means the door will rebound to th e top. Display "1~9" means the door will rebound to the position of the
whole travel. One tenth to Nine tenth of the whole travel etc.
4. Partial open/height
"0" appears on the display means close the partial open function. Display "1~9" means to set the di erent partial open position of the
whole travel.
5. Transmitter button recognition function
"0" appears on the display means the buttons recognition function is closed. Display "1" means the buttons recognition function is open.
6. Codes memory quantity
"A" appears on the display means the maximal code memory quantity is 50pcs. Press UP/DOWN button once, to increase or decrease
quantity. The code memory quantity is set on 5pcs*N, N=1~9. (The quantity is the multiple of 5).
7. Maintenance alarm
"b" appears on the d isplay and led light ashes 10 times quickly means the garage door and motor need total maintenance.
8. Automatic safety reverse
Automatic stop / automatic reverse are controlled by our software of circuit boards. We are circumspect to protect your children, pet or
other goods.
2