Accessmatic Fox 1000 C Manual De Usuario página 47

1000
STEP1 (Fig.3)
Attach the opener head to the steel track. Assembly the 2 "U" Hanging brackets with 6mm nuts supplied.
STEP2 (Fig.3)
Place the steel track and opener head assembly centrally on the garage oor, with the open head furthest away from the door. Lift the
front of the track up to the door bracket. Insert the pivot pin and secure it with the split pin supplied.
Fig. 4
Fig. 5
Sectional Steel C-Rail Assembly
2 Parts Steel C-Rail
P
RO
STEP3 (Fig.3, Fig.4)
Lift and support the opener head (with a ladder) so it is positioned centrally and level.
Fix the opener and track on ceiling by Iron bracket A & B.
WARNING: Do not allow children around the door, opener or supporting ladder
serious injury and/or damage may result from failure to follow this warning.
STEP4 (Fig.3, Fig.5)
Connect the straight arm to the bent arm with the bolt. Position and bolt the arms to
the top edge of the door using he bolt supplied.
STEP 5
Lift the garage door until the shuttle locks into the drive chain/belt.
Now, ready to program the openers.
Opening your life
6