Additional Safety Warnings - Skil 5280 Manual Del Propietário

Periodically remove the blade, clean the upper, lower guards and the hub area with
kerosene and wipe it dry, or blow it clean with compressed air . Preventive maintenance
and properly operating guard will reduce the probability of an accident.

ADDITIONAL SAFETY WARNINGS

GFCI and personal protection devices like electrician's rubber gloves and footwear will further
enhance your personal safety.
Do not use AC only rated tools with a DC power supply . While the tool may appear to
work, the electrical components of the AC rated tool are likely to fail and create a hazard to
the operator.
Keep handles dry, clean and free from oil and grease . Slippery hands cannot safely control
the power tool.
Use clamps or another practical way to secure and support the workpiece to a stable
platform . Holding the work by hand or against your body leaves it unstable and may lead to
loss of control.
Develop a periodic maintenance schedule for your tool . When cleaning a tool be careful
not to disassemble any portion of the tool since internal wires may be misplaced or
pinched or safety guard return springs may be improperly mounted . Certain cleaning
agents such as gasoline, carbon tetrachloride, ammonia, etc. may damage plastic parts.
Risk of injury to user. The power cord must only be serviced by a Skil Factory Service Center
or Authorized Skil Service Station.
WARNING
cause cancer, birth defects or other reproductive harm . Some examples of these
chemicals are:
Lead from lead-based paints,
•
Crystalline silica from bricks and cement and other masonry products, and
•
Arsenic and chromium from chemicallytreated lumber.
•
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are specially designed to filter out
microscopic particles.
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to
7