Technical Data; Appendices; Threshold Values For Rehab Buggies Transportable By Train - Ottobock Lisa Instrucciones De Uso

Technical data

10 Technical data
INFORMATION
► Much of the technical data below is given in mm. Please note that product settings – unless otherwise spe­
cified – cannot be adjusted in the mm range but only in increments of approx. 0.5 cm or 1 cm.
► Note that the values achieved during adjustment may deviate from the values specified below. The deviation
can be ±10 mm and ±2°.
Dimensions and weights
Model version
Overall width [mm]
Min./max. overall length [mm]
Push handle height (height of the buggy) [mm]
Front wheel diameter [mm]
Rear wheel diameter [mm]
Folding size (LxWxH) [mm]
Turning radius [mm]
Seat depth [mm]
Seat width (with/without padding) [mm]
Lower leg length [mm]
Seat height, front/rear [mm]
Back support height [mm]
Angle between back support and seat surface
(min./max.) [°]
Seat angle [°]
Max. load [kg]
Weight [kg]

11 Appendices

11.1 Threshold values for rehab buggies transportable by train

INFORMATION
► The products in this series fully satisfy the minimum technical requirements of regulation (EU) No. 1300/2014
regarding train accessibility for people with disabilities.
Feature
Length [mm]
Width [mm]
Smallest wheels ["]
Height [mm]
Turning radius [mm]
Maximum weight [kg]
Maximum obstacle height that can be overcome [mm]
Ground clearance [mm]
Maximum inclination angle on which the product will
remain stable [°]
72
Size 1
HR32130000
605
1020 / 1220
1030
180
250
1030 x 450 x 430
1400
300 / 350
360 / 320
270–400
500 / 380
650
90–120
22
50
13.6
Threshold value (according to Regulation (EU)
No. 1300/2014)
1200 (plus 50 mm for the feet)
700 (plus 50 mm on each side for the hands when mov­
ing)
approx. 3 or greater (according to the regulation, the
smallest wheel must be able to overcome a gap measur­
ing 75 mm horizontally and 50 mm vertically)
max. 1375; including a 1.84 m large male user (95th
percentile)
1500
200 (product with user, including luggage)
50
60 (at an upward slope angle of 10°, ground clearance
must measure at least 60 mm under the footrest for
going forward at the end of the slope)
6 (dynamic stability in all directions)
9 (static stability in all directions, also when wheel lock
engaged)
Size 2
HR32140000
655
1020 / 1220
1030
180
250
1030 x 450 x 430
1450
350 / 400
410 / 370
270–400
520 / 380
700
90–120
22
60
14
Lisa