SET CHRONO
This stage is used to program when the generator automatically turns on and o .
The factory setting for SET CRONO is disabled on the generator.
The chrono allows the user to program 4 time spans within a day to use every day of the week.
The switch-on and switch-o time can be set in every time slot, along with the days of use of the programmed time slot and the
desired temperature.
The setting of the current day and time is essential to ensure the chrono operates correctly.
RECOMMENDATIONS
Before using the chrono function, set the current day and time. Therefore check that the points listed in the "Set clock" sub-chapter have been
followed, so that the chrono function works. Aside from programming it, activate it as well.
The ignition and switch-o times must be within the arc of one day, from 0 to 24 and not over several days:
Example:
SET CHRONO
WHEN THE WEEKLY PROGRAMMER IS ACTIVE, A BOX OF THE RELATIVE ICON WILL APPEAR ON THE
CONTROL BOARD.
48
CORRECT
Switch-on time 07:00
Switch-o time 18:00
CONTROLS PROCEDURE
Press key 6.
Proceed by pressing key 2 until set chrono is displayed.
Con rm using key 6.
Use keys 4-5 to enable/disable - set/edit the time.
Press key 2 to go forwards 3 to go back.
Press key 1 several times to con rm and exit the menu.
DISPLAY
ENABLE CHRONO
ENABLE PRG1
ENABLE PRG2
ENABLE PRG3
ENABLE PRG4
START PRG1
STOP PRG1
MONDAY...SUNDAY
SET PRG1
START PRG2
STOP PRG2
MONDAY...SUNDAY
SET PRG2
START PRG3
STOP PRG3
MONDAY...SUNDAY
SET PRG3
START PRG4
STOP PRG4
MONDAY...SUNDAY
SET PRG4
TEMPERATURE
On/o
On/o
On/o
On/o
On/o
OFF-00:00-23:50
OFF-00:00-23:50
On/o
LOW - 07- 40 °C
OFF-00:00-23:50
OFF-00:00-23:50
On/o
LOW - 07- 40 °C
OFF-00:00-23:50
OFF-00:00-23:50
On/o
LOW - 07- 40 °C
OFF-00:00-23:50
OFF-00:00-23:50
On/o
LOW - 07- 40 °C
ENGLISH
INCORRECT
Switch-on time 22:00
Switch-o time 05:00
MEANING
Enable/disable the whole set chrono
Enable/disable PRG1
Enable/disable PRG2
Enable/disable PRG3
Enable/disable PRG4
PRG1 ignition time
PRG1 switch-o time
Enable/disable the days of PRG1
PRG1 temperature
PRG2 ignition time
PRG2 switch-o time
Enable/disable the days of PRG2
PRG2 temperature
PRG3 ignition time
PR3 switch-o time
Enable/disable the days of PRG3
PRG3 temperature
PRG4 ignition time
PRG4 switch-o time
Enable/disable the days of PRG4
PRG4 temperature