Comfort Function; Additional Thermostat Optional; Wifi Remote Control Module Application - Dal Zotto TECLA Manual Del Usuario

COMFORT FUNCTION

This reduces the ventilation speed, favouring the silence of the stove.
CONTROLS PROCEDURE
To activate, press key 4 until the display shows COMFORT ON.
Š
To deactivate, press key 4 until the display shows COMFORT OFF:
Š
WHEN THE COMFORT MODE IS ACTIVE, THE FAN 1 LED WILL FLASH ON THE CONTROL PANEL.
WHEN THE COMFORT FUNCTION HAS BEEN ACTIVATED USING KEY 4, THE STOVE WILL ALWAYS USE REDUCED
VENTILATION!

ADDITIONAL THERMOSTAT OPTIONAL

The appliance can control the room temperature using an additional external thermostat (optional).
After ignition (pressing key 1 or via chrono mode), the stove will work to reach the setting set on the thermostat, displaying WORK (contact
closed). The standard room probe is automatically ignored.
When the temperature has been reached by the thermostat (open contact), the stove will go to minimum, displaying MODULATE.
TO INSTALL AND ENABLE IT:
Š A mechanical or digital thermostat is required.
Remove the plug from the socket.
Š
Referring to the gure to the side, connect the two thermostat wires
Š
(dry contact - not 220 V!) on the relative terminals at the back of the
machine, one is red and the other one is black.
Power the stove.
Š
Press key 5, setting the temperature on LOU.
Š
The stove is now con gured correctly.
It will work controlling the additional external thermostat.
INSTALLATION MUST BE PERFORMED BY QUALIFIED STAFF AND/OR THE MANUFACTURER'S TECHNICAL AFTER
SALES ASSISTANCE
THERE ARE TWO STOVE OPERATING MODES, WHICH ARE DIFFERENT ACCORDING TO THE STAND BY. SEE "STAND
BY" CHAPTER.

WIFI REMOTE CONTROL MODULE APPLICATION

The stove is standard supplied with the WiFi remote control module.
With an internet connection, it allows for remote monitoring and control of the stove via Smartphone.
For further information, consult the manual contained in the WiFi remote control module box.
ENGLISH
4
5
51