TRAPP ES-450 Manual De Instrucciones página 46

or excessive vibration is noted, immediately turn the
equipment off in order to evaluate the problem; if
necessary, contact a TRAPP Technical Assistant.
If, for safety reasons it is necessary, immediately turn

the equipment off, by activating the electric motor
on/off switch or the gasoline-powered engine power
cut-off switch.
1
Image merely illustrative
Figure 1
Start the motor only if the belt tensioner lever (1) is in release position as per Figure 1, that is, without
stretching the belt as shown in the image above. Then, in that position, start the engine and after reaching full
rotation push the belt tensioner lever (1) in the direction as shown in the Figure 2 by indexing the motor on
the base and ensuring that the belts will be tensioned according shredder functioning specifications. The belt
tensioner lever can be only be tensioned when the motor is fully operational; if the motor is switched off it
may cause damages do motor.
46
Belt Tensioner Lever - ES-450G
Under normal working conditions, before turning

the equipment off, wait until the material being
shredded to get out from the machine.
Before turning the device on, note the

material outlet direction.
www.trapp.com.br