Unpack The Machine; Attach The Guard; Attach The Auxiliary Handle - GreenWorks Pro STC460 Manual Del Operador

8.1

UNPACK THE MACHINE

WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
• If parts of the machine are damaged, do not use the
machine.
• If you do not have all the parts, do not operate the
machine.
• If parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
8.2

ATTACH THE GUARD

WARNING
Do not touch the cut-off blade.
1. Put the shaft into the groove of the guard.
2. Put the bracket (1) into the slot (2).
3. Align the screw hole on the bracket with the screw hole
on the guard.
4. Tighten the screws.
English
8.3 ATTACH THE AUXILIARY
HANDLE
1. Remove the knob from the handle.
2. Attach the auxiliary handle and lower clamp (1) on the
shaft.
3. Set the auxiliary handle in the comfortable position.
4. Put the bolt through the holes...
5. Tighten the auxiliary handle with the knob (2).
7
EN