SKYLOTEC BEAMTAC 2.0 Instrucciones De Uso página 7

Fig.4 Marking:
Skylotec GmbH
Im Mühlengrund 6-8
56566 Neuwied
Germany
+49 (0)2631/9680-0
www.skylotec.com
Month and year of
Month and year of
manufacture
manufacture
Follow the instructions
Follow the instructions
Installation:
The structure to which the beam clamp is attached must be capable
of supporting the following loads in accordance with the standard
applied: EN 795: 2012 = 9 kN 1 person / DIN CEN / TS = 12 kN 2
persons / ANSI / ASSE Z359.18-2017 = 22, 2 kN 1 person
Always ensure that the beam clamp is not be fixed to an 'open'
structure (such as the end of a steel girder) from which it could slip
off in the event of a load being applied.
Manufacturer + address
Manufacturer + address
Space for inspection label
Space for inspection label
Article designation
Article designation
Serial number
Serial number
Article number
Article number
max. number
max. number
of users
of users
Relevant
Relevant
standards
standards
Marking of the supervisory body
Marking of the supervisory body
Data Matrix
Data Matrix
7 7