10.3 Setting the stand-by mode
30 minutes after the last action (depending on the settings), the appliance
automatically switches to stand-by mode. You can set different times for the stand-
by mode. The appliance is factory-set at 30 minutes
Prerequisite: The appliance is in stand-by mode (see „Switching on and off"
on page 55).
Please set the stand-by mode as follows:
•
Press the buttons for one-cup dispensing
simultaneously until the four buttons are weakly illuminated.
•
Press the button for two-cup dispensing
among the four possible timer settings.
→ The button for two-cup dispensing
Your selection is shown with the bean symbols
Display
•
Press the ON/OFF button
→ Depending on the selection, 1 to 4 bean symbols
confi rmation. The appliance goes back to stand-by mode.
Note
In standby mode, the appliance consumes much less energy. However, we
recommend switching the appliance off via the power switch if it will not be
used for an extended period (e.g. also overnight).
is brightly illuminated.
Time
30 minutes
(factory setting)
2 hours
4 hours
8 hours
to confi rm the selected time.
.
and for steam dispensing
several times to select
on the display.
fl ash on the display as
63