Setting The Hotplate - melitta ENJOY TOP TIMER Instruciones De Uso

unless they are 8 years or older
and are supervised. Keep the
appliance and the power cable
away from children under 8 years
of age.
• T he appliance may be used by
GB
persons with reduced physical,
sensory or mental abilities or lack
of experience and/or knowledge
if they are supervised or have
been instructed in the safe use of
the appliance and have understood
the potential hazards.
• C hildren must not play with the
appliance
• Replacement of the power cable
and all other repairs may only be
carried out by Melitta
Service or by an authorised
repair shop.
2. Before first use
• Ensure that the power supply in your home
corresponds to that on the model plate on the
base of the appliance.
• Connect the appliance to a power source. Unused
cable can be stored in the base of the appliance .
• All appliances have been tested during production
to ensure they work perfectly. Therefore there may
be for example water deposits remaining. Rinse the
appliance twice with the maximum amount of water
and without a filter bag or ground coffee, in order to
clean it.
• For the best coffee enjoyment and convenient use,
the appliance is equipped with various features.
These features are explained below.

3. Setting the hotplate

Keeping coffee warm on the hotplate affects the taste
of your coffee. To avoid this you should enjoy your
coffee fresh, by drinking it as soon after brewing as
possible. Unnecessary warming also uses valuable en-
ergy. The factory settings for the appliance are for 40
minutes of warming. After this the hotplate turns off
automatically. This time can be changed as needed:
• Hold down the START-button  and by briefly
pressing the h-button  set the desired time
(20, 40 or 60 minutes). The current warming
time will be shown in the display .
• Once you have set the desired warming time
let go of the button. Your setting is now saved.
• The last setting chosen remains even after removing
the power cable.
8
4. Making coffee
• Ensure that the appliance is connected to the power
source.
• Open the lid on the water tank .
• Fill the water tank with the desired amount of water
using the glass pot . With the help of the water le-
vel display on the tank  you can choose the correct
number of cups. Small cup symbol = approx. 85ml
coffee per cup, large cup symbol = approx. 125 ml
coffee per cup.
• Close the lid on the water tank and place the glass
pot with closed lid in the appliance.
• Open the swing filter  to the left.
• Fold a Melitta
and place it in the filter holder . Press the filter
bag into the filter holder by hand, to ensure a good
fit.
• Swing the filter back into the appliance. An audible
click tells you it is inserted properly.
• Put the ground coffee into the coffee filter. We
recommend using 6-8 g of coffee per large cup at a
medium setting of the AromaSelectors
• Alternatively, you can vary the taste of the coffee
according to your personal preference using the
same quantity of coffee. For a milder coffee, turn the
AromaSelectors
coffee, turn it to the right (
Customer
• Turn the appliance on . Brewing begins.
®
• After making your coffee the hotplate will keep it
warm and will turn off automatically after about 40
minutes. This avoids unnecessary use of electricity
and saves energy. You can of course turn the
machine off manually at any time.
• The drip stop prevents your coffee from dripping,
when you remove the pot from the appliance .
5. Timer Feature
The appliance is equipped with a TIMER feature. This
starts the brewing process at a time you programme.
• Prepare the appliance as described in point 4 'making
coffee', but without pressing the START button.
• To set the desired start time, hold down the TIMER
button . The first time you programme it the
display will show 00:00. While setting the timer the
word 'timer' appears in the display.
• Set the desired start time by repeatedly pressing
the h and m buttons . This goes faster if you hold
down the button.
• After letting go of the TIMER button the current
time will show. The chosen start time is saved until
you set a different time or remove the appliance
from the power source.
• By briefly pressing the TIMER button  the timer
feature is activated for the next brewing process.
To show this the TIMER button  is illuminated
and the programmed start time shows briefly in the
display .
• The appliance automatically starts to make coffee at
the time you have set.
• As long as you do not remove the plug from the
socket or set a new start time, the previous start
time is saved.
• By briefly pressing the TIMER button  you can
deactivate the timer feature at any time. The light in
the TIMER button  goes off.
• If you want to make coffee before the start time you
have programmed, press the START button . The
filter bag 1x4
at the embossed seam
® ®
to the left ( ). For a stronger
®
).
®
.