Description Of The Icl Iw Hank-To-Cone Machine; Technical Characteristics - Corghi ICL IW Manual De Uso

DESCRIPTION OF THE ICL IW HANK-TO-
ICL IW machines are hank-to-cone machines with electronically controlled yarn guides
and slow start-up, designed in order to cater for all types of hank-to-cone winding
requirements, guaranteeing an excellent quality final product. They can also be used for
cone-to-cone or from spool-to-cone winding operations, permitting the yarn to be
recovered from the cloth.
ICL IW series machines also offer extremely low noise levels and outstanding user-
friendliness.
Configurations of non-aligned heads may also be used.

TECHNICAL CHARACTERISTICS

- Drive: ......................................................................................... 1 protected motor per head
- Power supply voltage:
• up to 12 heads ................................................................................. 230 VAC 1 Ph 50/60 Hz
• ICL from 12 to 48 heads .................................................................. 400 VAC 3 Ph 50/60 Hz
- Max. absorption per head: ............................................................................................ 180W
- Running speed: ................................................................... variable from 250 to 700 m/min
- Central speed control with digital reading
• Slow starting
• Acceleration time variable from 5 sec to 99 sec
- Standard cross-over angles: ....................................................................... 13 or 16 degrees
- Cross-over angles: ......................................................................................... 11°/14° - 15°/18°
- Winding travel stroke:
• ICL IW: ................................................................................................................. 6" (152 mm)
• ICL IW 8": ............................................................................................................ 8" (200 mm)
- Cone dimensions: .............................................................................................. max. 290 mm
- Winding:
• ICL IW: ..................... on 9°15', 5°57', 4°20', 3°30' taper cones on live centres or spindle
• ICL IW 8": .................................... on 5°57', 4°20' taper cones on live centres or spindle
- Reel size:
• width: ........................................................................................................................ 340 mm
• circumference: ............................................................................................... 1100/1800 mm
- Slubcatcher: .................................................. mechanical system with micrometric control
- Waxing: ............................. counter-rotating motion with square-holed paraffin wax rings
- Overfeeders: ...................................................................................................... two per head
- Yarn tensioner: ........................ two per head (one with weight, one with rotating spring)
- Threading: ................................................... automatic yarn threading of waxing assembly
- Automatic restarting (in case of snaring): ....... by means of compensating lever release
- Composition
• ICL: ......................................................................................................... 48 heads maximum
ICL/3-IW three head basic section
ICL IW-4 three head additional section
ICL IW-AP three head special additional section
30
CONE MACHINE
ICL IW - ICL 8" IW operator's manual