AND UB-401 Manual De Instrucciones página 7

Note)
The UB-401, once used, will provide an inflation appropriate to the user, based
on the previous measurement.
If your systolic pressure is expected to exceed 150 mmHg, read "For those
whose systolic pressure is over 150 mmHg" on page 7.
1. Sit comfortably with the cuff at the same level as
your heart and relax.
2. Press the START button.
All display symbols appear briefly, then the display
changes as indicated in the figure at the right as
measurement begins.
The cuff starts to inflate. It is normal for the cuff to
feel very tight.
Note)
If you wish to stop inflation at any time, press the
START button again.
3. When inflation is complete, deflation starts
automatically and the
indicate that measurement is in progress.
Once the pulse is detected, the mark flashes with
each pulse beat.
Note)
If an appropriate pressure is not obtained, the device
starts to inflate again automatically.
4. When measurement is complete, the systolic and
diastolic pressure readings and pulse rate are
displayed.
The cuff exhausts the remaining air and deflates
completely.
5. Press the START button again to turn off the power.
Remove the cuff.
Note)
The device is provided with an automatic power shut-off function.
Allow at least ten minutes between measurements on the same person.
Measurements
(heart mark) appears to
ENGLISH 6