AND UB-401 Manual De Instrucciones página 4

Symbols
Turns on and off the device
Direction guide to install battery
Direct current
SN Serial number
Date of manufacture
Type BF: Device, cuff and tubing
are designed to provide special
protection against electrical
shocks.
Appears when measurement is in
progress and flashes when the
pulse is detected.
Previous measurement stored in
MEMORY
Appears when the battery voltage
is too low for the device to work
properly.
Appears if the systolic and
diastolic measurements are
within 10 mmHg of each other.
Appears if the pressure value is
unstable due to movement during
the measurement.
Appears if the pressure value did
not increase during pump up.
Appears when the cuff is not
fastened correctly.
Appears when pulses are not
detected correctly.
Systolic blood pressure in mmHg
Diastolic blood pressure in
mmHg.
Pulse beats per minute
The label of the medical device
by the EC directive
The certification trade mark
registered to the Australian
Communication Authority by the
Trademarks office.
Symbols
Function / Meaning
ENGLISH 3
Treatment
___________
___________
___________
___________
___________
___________
Measurement is in progress -
- remain as still as possible.
___________
Replace all batteries with
new ones.
Fasten the cuff correctly, and
try the measurement again.
Try the measurement again.
Remain very still during the
measurement.
Fasten the cuff correctly, and
try the measurement again.
Fasten the cuff correctly, and
try the measurement again.
Fasten the cuff correctly, and
try the measurement again.
___________
___________
___________
___________
___________