Use; Dry Vacuuming; Wet Vacuuming; Cleaning - Metabo ASR 35 AutoClean Instrucciones De Manejo

ENGLISH
ENG
6.4 Volume flow control display
The volume flow control display lights up when the
container is full and/or if the suction hose is
blocked. (3).

7 Use

7.1

Dry Vacuuming

Vacuum using a dry filter, dry appliance and dry
accessories only. If the cartridge is damp, dust
may stick and form a crust.
Always use filter cassettes when using paper filter
bags (7), fleece filter bags (6) or PE filter bags (5)
(16).
7.2

Wet vacuuming

Never operate the machine without inserting
a filter cassette first (16) The machine may be
destroyed and water may also escape.
Vacuum without a paper filter (7) bag. You can use
either fleece filter bags (6) or PE filter bags (5). The
filter cartridges (16) are suitable for wet vacu-
uming.
Before carrying out any wet vacuuming, remove
the dry vacuumed material. This process will
prevent severe soiling and encrustation.
The integrated water sensor switches off the motor
when the container is full. Empty the appliance. If
the appliance is not switched off, the restart
protection device remains effective. The appliance
is not operable again until it has been switched off
and switched back on again.
After switching off, some water may run back out
of the hose.
Before emptying, first of all take the suction hose
out of the liquid.
If you are then going to dry vacuum, insert a dry
filter. If there is frequent switching between dry
and wet vacuuming, we recommend the use of a
second (replacement) filter. Allow the filter,
container and accessories to dry: otherwise dust
may adhere to damp components.
7.3 Transport
In the case of the ASR 35 L AutoClean, leave the
hose on the appliance to prevent dust accidentally
escaping.
Wrap the suction hose about the vacuum cleaner.
Place the accessories in a suitable plastic bag and
seal the bag.
Suspend the mains connection lead on the cable
holder (11).
10
The upper part (8) must be securely sealed to the
container (10) - check that the snap locks (9) are
closed.

8 Cleaning

8.1 General Cleaning Instructions
Clean the container and accessories with water.
Wipe the upper part (8) with a damp cloth.
Caution! This appliance contains dust that is
harmful to health. Discharge and maintenance
operations (including disposal of the dust collec-
tion containers) must only be carried out by quali-
fied specialists wearing appropriate protective
clothing and equipment.
Emptying the Container
- Unplug.
- Open the snap locks (9). Remove the upper part
(8) from the container (10).
- Tip out the container.
Dispose of the paper filter bag/fleece filter bag.
- Unplug.
- Pull on mask.
- Open the snap locks (9). Remove the upper part
(8) from the container (10). - Carefully pull back and remove the paper filter
bag (7)/fleece filter bag (6) from the suction
opening (12). Seal the flange of the paper filter
bag/fleece filter bag by folding over the cover.
- Dispose of the vacuumed material in accordance with legal regulations.
Disposing of the PE Filter Bag
- Insert mains plug.
- Switch on the vacuum cleaner and vibrate the
filters: turn the switch (2) to the "IR" position.
- Switch off the vacuum cleaner: turn the switch (2)
to the "0" position.
- Pull on mask.
- Open the snap locks (9). Remove the upper part
(8) from the container (10). Before setting down
the upper part, turn switch (2) to the "I" position
so that any falling dust is vacuumed.
- Carefully pull back the PE filter bag (5) from the
suction opening (12). Seal the flange of the PE
filter bag by folding over the cover.
- Dispose of the vacuumed material in accordance
with legal regulations.

9 Servicing

9.1

General Instructions

Before performing any maintenance, always
switch off the appliance and remove the
mains plug.